While many people routinely turn their bike upside-down to perform repairs, doing so can damage handlebar-mounted components such as brake levers, shifters and e-bike screens. The Original Handlebar Jack is designed to protect those items, by keeping the bars off the ground.
Invented by cyclist Andy Wilkoff, the Handlebar Jack system actually consists of two small jacks, 3D-printed out of ABS plastic. Each one has a handlebar cradle on top, and three fold-out legs on the bottom.
While the bike is still right-side up, the jacks are attached to the handlebar grips via Velcro straps, and their legs are pulled open to form a tripod. When the bike is subsequently turned over, those legs hold the handlebars 3.25 inches (83 mm) clear of the ground, keeping any bar-mounted doohickies from getting scratched or bent.
As an added bonus, when the system isn’t in use, the two folded-down jacks can be interlocked end-to-end, thanks to magnets on the insides of their legs. They weigh a combined 3.2 oz (91 g).
The Original Handlebar Jack is available now via the link below, for US$24.99 a pair.
Handlebar Jack keeps bar-mounted gear from getting bent [New Atlas]
1 thought on “Bicycles Handlebar Jack”
Comments are closed.